How to Install DXAMB1 Android 4.1.2 on Samsung Galaxy S3 Mini I8190N Firmware

Galaxy S3 Mini I8190N (NFC Version) can now be updated to the latest Jelly Bean firmware update accessible for this Android phone – DXAMB1 Android 4.1.2. This firmware update has been rolled out to particular areas so it implies that as soon as you might be completed flashing this firmware using the tutorial below you would possibly find some unusual bits of apps and languages, don’t panic, it’s normal. You can download this latest software program replace on your phone by means of Samsung KIES, or proceed reading under if you wish to set up it manually on your phone. I8190NDXAMB1 is a branded firmware, but you may set up it on any Galaxy S3 Mini. You can easily update Galaxy S3 Mini I8190N to DXAMB1 Android 4.1.2 using our tutorial below.

As you proceed reading below, we will information you through the complete technique of find out how to install DXAMB1 Android 4.1.2 Jelly Bean on Galaxy S3 Mini I8190N using ODIN. Don’t overlook to backup all of your apps and private information as a precaution, since you by no means know when something might go wrong. You don’t even need ClockworkMod recovery or a rooted phone to install this firmware update as we will likely be using ODIN

Android 4.1.2 DXAMB1 Firmware Details:

PDA: I8190NDXAMB1
CSC: I8190NQLBAMB1
Version: 4.1.2
Date: 2013 February
Regions:

To Remember:

• This tutorial is only for Samsung Galaxy S3 Mini I8190N. Please don’t try this on any other variants of the phone.
• I8190NDXAMB1 is an official firmware for the Galaxy S3 Mini I8190N, not a custom ROM.
• Make sure you backup all your data in your phone before proceeding.

Rooting Warning: This is an official Android 4.1.2 build DXAMB1 update for Galaxy S III I8190N, which means you will lose root as soon as you install this update. You will again have to root Galaxy S3 Mini to gain full system access and be able to install root apps again. We will soon do a tutorial on how to root Galaxy S3 Mini I8190N on the latest Android 4.1.2 firmware.

How to Install DXAMB1 Android 4.1.2 on Samsung Galaxy S3 Mini I8190N Firmware

Step 1 - Download Android 4.1.2 I8190NDXAMB1 for Galaxy S3 Mini to your computer and extract the zip file.

Step 2 - Download ODIN v1.85 which will help you to install Android 4.1.2 on Samsung Galaxy S3 Mini I8190N.

Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Galaxy S3 Mini USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

• Click on ‘PDA’ and select file with ‘CODE’ in its name.
• Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
• Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
• Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy S3 Mini has now been updated to Android 4.1.2 build DXAMB1 firmware update. Go to Settings > About phone to verify.

Hit +1 or LIKE as a thanks to us!

To Remember:

• This tutorial is only for Samsung Galaxy S3 Mini I8190N. Please don’t try this on any other variants of the phone.
• I8190NDXAMB1 is an official firmware for the Galaxy S3 Mini I8190N, not a custom ROM.
• Make sure you backup all your data in your phone before proceeding.

Rooting Warning: This is an official Android 4.1.2 build DXAMB1 update for Galaxy S III I8190N, which means you will lose root as soon as you install this update. You will again have to root Galaxy S3 Mini to gain full system access and be able to install root apps again. We will soon do a tutorial on how to root Galaxy S3 Mini I8190N on the latest Android 4.1.2 firmware.

Complete Step-By-Step Instructions:

Step 1 - Download Android 4.1.2 I8190NDXAMB1 for Galaxy S3 Mini to your computer and extract the zip file.

Step 2 - Download ODIN v1.85 which will help you to install Android 4.1.2 on Samsung Galaxy S3 Mini I8190N.

Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Galaxy S3 Mini USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

• Click on ‘PDA’ and select file with ‘CODE’ in its name.
• Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
• Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
• Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy S3 Mini has now been updated to Android 4.1.2 build DXAMB1 firmware update. Go to Settings > About phone to verify.

Hit +1 or LIKE as a thanks to us!